K187 helical bevel gear box

helical bevel motor reductor Product Description

K series 90 degree bevel gearbox were 12 model. Background with R series helical gear reducer electric generator synthesis multistage slowing down. Power 0.12-200kw, ratio 32625. Torque 5.36-200 ~ 50000N m.

K series helical bevel motor reductor provides two machined bottom flange, feet flat or B5 B14 flange, moment of supporting frame way.this way and various installation position. Output type has solid shaft, hollow shaft. Spline hollow shaft and hollow shaft locking plate. Customers can choose according to different requirement.

K series 90 degree bevel gearbox references motor for class F insulation. IP54 380 volts, protection, and 50 hz three-phase asynchronous motor, suitable for the ambient temperature - 10 °C a + 40 °C altitude, 1000m conditions operation, such as beyond the above conditions of use. Please get in touch with our company.

 

 

helical bevel motor reductor specification

K series 90 degree bevel gearbox is one kind of Helical Bevel type gearbox , High-stainless cast iron case,helical bevel motor reductor is designed based on modularization , which bring many difference kinds of combinations ,mounting types ,and structure designs .The detail classification of ratio can meet various of working condition .High Transmission efficiency ,Low energy consumption, superior performance . The hard tooth surface gear use the high quality alloy steel , the process of carburizing and quenching, grinding ,which give it follow characters : Stable transmission , low noise and temperature ,high loading ,long working life. which widely use for industry equipment of metallurgy ,Building Material , Chemical , Mining , Oil, Transportation , Papermaking , Sugar making , engineering Machines ,etc

1)90 degree bevel gearbox Output speed: 0.6~1,028r/min

2)helical bevel motor reductor Output torque: up to 21700N.m

3)90 degree bevel gearbox Motor power: 0.12~200kW

4)helical bevel motor reductor Mounted form: foot-mounted and flange-mounted mounting

Method of selection for helical bevel motor reductor

Curve-tooth 90 degree bevel gearbox is based on the smooth load running, daily working time and the  frequency of startup times to design, but in actual operation circumstances, it is often not in accordance with the theoretical data. Therefore helical bevel motor reductor must be sure the type of loading, operation time, frequency of operation to determine the service factor of F1, the startup factor of F3, the original motivation factor of F2. So that it is less than or equal to service factor fn in selection table, or multiply the required torque by service factor (f1xf2xf3), the total should be less than or equal to the max torque of reducer.

If K series 90 degree bevel gearbox is only under unidirectional load, it is better to indicate the direction of rotation ( from the output direction), this will be good for improving the bearing force of spiral bevel gears.

We can take an order with special specifications and can provide customers with specialized design services.

helical bevel motor reductor Working Environment

1,90 degree bevel gearbox Working temperature: -40~50°c ( The lubrication should be heated above 0°c if the machine works below 0°c)

2,The altitude of working place for the helical bevel motor reductor should be lower than 1000 meters.

3,The input rotate speed of the 90 degree bevel gearbox should not exceed 1800rpm. The circumferential speed of the gear should not exceed 20m/s.

4,helical bevel motor reductor is suitable for normal-reverse rotation.

5,90 degree bevel gearbox is without industry limitation.

6,Please consult our technical supporting department for other circumstances.