1. Characteristics

The KDAB Cylindrical Gear Reduction structure design adopts the priority number system for specifications, main parameters and transmission ratio. The standardization and generalization of parts are high, and the interchangeability is good, which is convenient for organizing production and delivery.

 

The KDAB Cylindrical Gear Reduction is made of high-quality alloy steel. After carburizing and quenching, the hardness of the tooth surface can reach HRC60. It has high allowable stress and good wear resistance, so it has large bearing capacity and long service life.

 

The transmission ratio of KDAB Cylindrical Gear Reduction range is wide (7.1~500), compact structure and large carrying capacity (maximum rated power is 3400kW). Therefore, it has strong applicability and can be widely used in various machines driven by different prime movers.

 

Gear and bearings are generally splash lubrication for easy maintenance. According to actual needs, fan cooling, annular cooling, or fan heating annular cooling, or pressure circulation lubrication can be used. 

KDAB Series Cylindrical Gear Reduction
KDAB Series Cylindrical Gear Reduction

 

  1. Application Range

The KDAB Cylindrical Gear Reduction is mainly used for mechanical transmission of various mechanical equipment such as mining, metallurgy, cement, construction, chemical industry, special agents, etc. The speed of high-speed shaft does not exceed 1500r/min, the peripheral speed of gear is not more than 18m/s, and the working environment is -40°C. ~ +40 °C, can run in reverse.

 

The speed of the high speed shaft does not exceed 1500r/min, the peripheral speed of the KDAB Cylindrical Gear Reduction is not more than 18m/s, and the working environment temperature is -40°C~+40°C, which can run in reverse rotation.

 

  1. Model

KDAB160、KDAB180、KDAB200、KDAB225、KDAB250、KDAB280、KDAB320、KDAB360、KDAB400、KDAB450、KDAB500、KDAB560、KDAB630、KDAB710、KDAB800

 

  1. Ratio

The gear ration are 160, 180, 200, 225, 250, 280, 320, 360, 400, 450, 500.

 

  1. Mounting Type

Hollow shafts   2 forms

solid shafts   2 forms

KDAB Series Cylindrical Gear Reduction
KDAB Series Cylindrical Gear Reduction

 

  1. Maintain

The shaft axis of the low speed shaft of KDAB Cylindrical Gear Reduction should be concentric with the axis of the intermediate rotating device. The skew should be less than 1° (when there is no radial displacement) and the radial displacement is less than 1.9mm (when there is no skew).

Motor speed regulation should be gradually adjusted from low speed to high speed or high speed to low speed. It should not be converted from low speed to high speed or high speed to low speed in an instant.

 

The KDAB Cylindrical Gear Reduction must be replaced with new lubricant after it has been running for 300h. The oil is then replaced every 2000 hours of operation. Other lubrication points should also be regularly removed and lubricated.

 

Christine Zhu ( Sales Department; Miss. )          

NER GROUP CO.,LIMITED                            
Tel:+86-535-6330966
Mobile:+86-13688909643
https://www.bonwaygroup.com/
https://twitter.com/gearboxmotor
https://www.facebook.com/ner.sogears.1
Viber/Line/Whatsapp/Wechat: 008613688909643
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.;  

Skype ID: This email address is being protected from spambots. You need JavaScript enabled to view it.
Factory Add: No.5 Wanshoushan Road, Yantai, Shandong Province, China (264006)